Some users find that the marked fonts or graphics are distorted when using the laser marking machine. For example, the marked straight line is curved. What is the reason? This is because the format of the laser marking machine has not been corrected, which will cause the marked graphs such as rectangles to become sectors,… Continue reading The Straight Line Printed by Laser Marking Machine Is Curved?
Param(F3) Configuration – Other: Fly Mark and Red light pointer
Fly Mark Mark on fly: choosing this item refers to enable “Fly mark” function. Fly from right to left: Choosing this item indicates that stream line direction is from right to left. Fly continue mode: Choosing it indicates mark object is continuous one, namely, we need to mark content on continuous object. (Such as: wire ,cable and so… Continue reading Param(F3) Configuration – Other: Fly Mark and Red light pointer
Param(F3) Configuration: Other
Starting Mark Delay: The delay before marking. Finish Mark Delay: The delay after marking. Max Power Delay: The Max dealy when the laser power is changed from 0% to 100% during marking. When the power’s range is changed less then 100% during marking, the time is less proportional to the Max vaule. This function is suit for the… Continue reading Param(F3) Configuration: Other
Param(F3) Configuration: Port
Stop mark input port: When in marking process, if the system detects there is a corresponding input signal, the current marking operation will be ended, and prompt the users with error information. Door IO: Check the port signal for opening and closing of the safety door. When the safety door is opened, processing will automatically stop. Processing… Continue reading Param(F3) Configuration: Port